It can be frustrating when you don’t know how to unlock your faulty safe locks. When your safe gets faulty, what’s next? You’ll need to access your valuables, regardless. Unlocking your faulty safe lock is a huge headache if you don’t have the technical-know-how. Although your safe is a great tool to protect your valuables, it can also be a pain in the side when faulty.
They can be a hard nut to crack. Join us in this article as we show you some of the ways to unlock your faulty safe locks.
Let’s unpack!
Why Won’t My Safe Lock Open?
If you try to unlock your faulty safe locks without identifying the cause, it could lead to more damage. Before we show you how to unlock your faulty safes, let’s see some of the reasons why your safe locks won’t open. We’ve listed them here for you:
- Lost key: This is a common issue if you have a mechanical safe. A safe with a misplaced key will need unlocking. You’ll require a locksmith to unlock it.
- Dead batteries: If you’re using a digital lock, there’s always a possibility of having a dead battery. You’d have to change the batteries to unlock your safe.
- Jammed bolts: A jammed bolt blocks the movement of the locking mechanism and prevents your lock from opening. In such situations, it’s best to contact a locksmith.
- Forgetting your combination code: If you forget your safe lock’s combination code, you’d probably want to guess it. However, entering a certain number of wrong combinations can lead to a safe lockout. That’s a huge bummer. Reach out to a locksmith to prevent escalation.
- Code deactivation: Another issue that might occur with digital locks is code deactivation. This can be as a result of various issues. If you’re confused about what to do, it’s best to contact a locksmith.
- Faulty/disconnected wires: It’s also possible for your lock wires to get disconnected or damaged. You can remove the keypad to inspect the wires for any irregularities. However, if you don’t know how to do this, it’s best to contact a locksmith.
How to Unlock Your Faulty Safe Locks
Let’s show you some of the ways to unlock your faulty safe locks. We’ve laid down some of them for you:
1. Check your batteries
If you have a digital lock and it isn’t working, one of the things you can do is to check your batteries. Ensure that the batteries in your safe’s electronic lock are fully charged. If they’re dead, you can replace them and try entering the code again.
2. Use your override key
This is a master key that comes handy in place of a misplaced key. Using an override key to unlock your faulty safe locks will depend on the specific type and model of your safe. If your safe lock has an override key, then you can use it to open your safe in case of a malfunction or if the combination is forgotten. Look for the key in your safe’s user manual and how to use it. If you’re unable to find it, contact your manufacturer for assistance.
3. Reset the code
Resetting your safe lock code can help in cases where you forgot your previous code. To reset your safe lock code, you’ll need to follow the specific instructions in your lock’s manual. This may vary based on the brand and model of your safe. Some may require you to enter a master code specified by the manufacturers for the safe, others might call for special tools.
However, if your safe lock is faulty and is not responding to your attempts to open it with the correct code, contact a locksmith.
4. Check the bolts
If your lock mechanism is not functioning properly, it could be because the bolts are not properly aligned with the lock. By checking the bolts, you can ensure that they are properly aligned and tightened. If you notice that any of the bolts are loose, be sure to tighten them. This may help you resolve the lock fault. However, if the fault persists, reach out to a locksmith.
5. Proper lubrication
Proper lubrication can help you unlock your safe locks. It reduces friction and allows the lock mechanism to move more freely. With time, dirt and other tiny particles can accumulate in the lock keyhole. This can cause it to become stiff and hard to turn. Applying a little quantity of lubricant to your lock can help to loosen its stiffness. Doing this will make it easier for you to turn and open the safe.
6. Use a drill
If you’ve tried every possible method to unlock your faulty safe locks and it fails, you can try using a drill. You should only use this as a last resort and with extreme caution. Our advice here is not to do this until you get the permission of a locksmith. They might still be a better option. Anyway, if you are keen on using this last resort, make sure you have the proper tools and skills before attempting to open your safe with a drill. If you don’t know how to do it, ensure you contact a locksmith.
7. Contact your manufacturer
If you still can’t unlock your faulty safe locks after using these methods above, call your manufacturer for assistance. They may be able to provide you with a solution or refer you to a locksmith that will help you to open the safe.
8. Call a locksmith
In a case where your manufacturer is unable to help you, or can’t do much, consider calling a professional locksmith. They have the right skills and experience to unlock your faulty safe locks. They know how best to open your faulty safe without causing a lot of damage.
Protecting your valuables and having access to it whenever you want to is essential. Unlocking faulty locks can be daunting. You’ll need to go beyond average knowledge to get the job done and most times, only the professionals can come to the rescue. If you’re living in Phoenix, let’s come to your rescue today.
Alcatrazlock is the closest locksmith to you. We train our skilled locksmiths in safe lock replacements, new lock installations, and maintenance. We know how best to unlock those faulty safe locks without unnecessary delays. Our services are at pocket-friendly rates. If you have any questions regarding locksmith services, feel free to contact us.